User guide

Etherlike Port Port Authentication (802.1x)
6-257
AlliedView NMS Administration Guide (Configuring Network Services)
FIGURE 6-262 Service Management Form - Port Authentication Active
Note: Once Port Authentication is enabled (by setting to Enabled at both device and port), you cannot add or
delete a VLAN on that port. The following type of error is seen in the console window when modifying a
VLAN on a port (via view/modify the port or deploy/apply the port profile):
delete VLAN=40 interface=1.2
Processing.....
Error (040626) Port Authentication has been enabled on ETH: [1.2]
officer SEC>>
To add or delete a VLAN, you must disable Port Authorization (either disable the feature on the port or deprovision the port).