User guide

Software Upgrade with EPSR Upgrading One Node that is part of an EPSR Configuration
AlliedView NMS Administration Guide (Configuring Network Services)
6-242
FIGURE 6-246 Resolving Conflicting VLAN Sets
FIGURE 6-247 Selecting a VLAN to ignore during Upgrade
6.20.3 Upgrading One Node that is part of an EPSR Configuration
In the previous example, the EPSR configuration included three devices, and all three devices were selected for a software
upgrade. If the user does not choose all the devices that take part in the EPSR configuration, the AlliedView NMS determines
that additional devices must be upgraded as well. Two other GUIs may therefore appear while performing the upgrade
sequence: