User guide

Viewing NTE8 Endpoints on Physical Map NTE8 Dual Circuit Provisioning
6-233
AlliedView NMS Administration Guide (Configuring Network Services)
6.17.8 Viewing NTE8 Endpoints on Physical Map
Creation of PPP or MLPPP circuits through the NMS (or through CLI, directly) will trigger a discovery process on the
devices so that they will know which Device and Port is currently at their far-end. This information is collected during NMS
discovery of devices and will generate appropriate links on the Physical and VLAN maps, showing VLAN connectivity.
The following figure shows the Physical map and the physical link between the .20 and .18 devices. Double-clicking on the
link brings up the Layer 2 Links table, and which includes all the link types (DS1. PPP, and MLPPP) that are included.
FIGURE 6-236 NTE8 Endpoints on the Physical Map