User guide

Provisioning iMG6x6MOD with T1/E1 Card and CES Circuit Emulation Service
6-209
AlliedView NMS Administration Guide (Configuring Network Services)
FIGURE 6-213 View the CES Service Parameters
Selecting the View/Modify CES Port buttons brings up the CES DS1/E1 Port Management Panel, with a different panel for
each port, 1 and 2. These tabs allow the user to view and change the parameters if necessary. Refer to the following figures.
Caution: Changing these parameters must be done with care, since there may be complementary
parameters at the other end of the connection, and so a change in a parameter value may affect
service.