User guide

Circuit Emulation Service View Provisioning Results
AlliedView NMS Administration Guide (Configuring Network Services)
6-198
6.16.6.5 Port Thresholds Tab
This form allows the user to modify the threshold values for the DS1/E1 and PSPAN statisitcs.When a new value is entered in
the New Value field, the Modify button is enabled.
Note: In most cases, the DS1/E1 values are not modified because they are part of the DS1/E1 port profile; if the
user does change a value, the port is now out of sync with its associated profile, and an “*” will appear next
to the Profile name on the DS1/E1 Port tab form (as well as the Port Inventory table). In the dual endpoint
configuration, the “*” will appear next to the specific port where the values were changed from the Profile.
To Resync the port, the user must re-apply the profile on the DS1/E1 tab form, which puts the values back
to what they are in the Profile.
FIGURE 6-199 Port Thresholds Graph Tab for two Endpoints