User guide
Discovery Configurator (Service Provider) Node Discovery Tab
AlliedView NMS Administration Guide (File Administration)
3-10
3.2.6 Node Discovery Tab
FIGURE 3-6 Discovery Configurator – Node Discovery Tab.
This tab specifies specific nodes to discover (or exclude from discovery).
Nodes can be added, modified, or deleted with the Add, Modify, and Delete buttons.
The “Discover Node” toggle, when checked, means to discover the node. When unchecked, that node will be ignored
(excluded) from discovery.
The “Discover Parent Network” tab means to discover all the devices in the parent network, as well. The parent network will be
considered to be all IP addresses in the same subnet as the node as defined by its IP Address and its Net Mask. When
unchecked, only the one node will be discovered.
The SNMP version used can be selected here as well, with the properties determined by the version, as shown in the following
figure.