User guide

Network Discovery Tab Discovery Configurator (Service Provider)
3-9
AlliedView NMS Administration Guide (File Administration)
FIGURE 3-5 Setting Properties for SNMPv3
All networks, including the local net, have to be added via the network tab.
Caution: It is not possible to delete a network from discovery once discovery begins on that network.
Discovery begins any time immediately after saving changes. Therefore, to permanently remove
a network from the discovery configuration, shut down the NMS to shut down the discovery
process and use the standalone Discovery Configurator to delete the unwanted network.
Networks are successfully deleted, however, when deleted before
saving changes.
The user can add networks and nodes in the Network Inventory screen as Managed Objects and this will take effect immedi-
ately. The menu choice:
• Network Inventory / Edit -> Add Network
• Network Inventory / Edit -> Add Node
brings up the dialog to add a network or node. Refer to 3.2.8.2.