User guide

Creating the EPSR SuperRIng SuperLoop Prevention (Superring)
6-173
AlliedView NMS Administration Guide (Configuring Network Services)
6.14.2.4 Enable the EPS Domains
Now that the SuperRing has at least one Protected VLAN on it, the domains can all be enabled. Select one of the control
VLANs and on the map select View EPS Control ring, as shown in the following figure.
FIGURE 6-167 View one of the EPSR Control Rings
FIGURE 6-168 View one EPS Control VLAN (used to enable Protection Domain)
Click on the tic boxes under Is Enabled, and then Modify Protection Domain. When this is done this and the other domains
become enabled as well, as shown below.