User guide

Creating the EPSR SuperRIng SuperLoop Prevention (Superring)
6-167
AlliedView NMS Administration Guide (Configuring Network Services)
6.14.2.2 Create Second EPS Ring that is a Peer of First EPS Ring
The steps to create the second, peer EPS Ring are similar to the first. In choosing a looped Network VLAN where there is a
shared link with another EPS Ring, the user must put in a non-zero value for the EPSR Priority, and this value must be differ-
ent than the first ring.
Select the Network VLAN and click on Create Protection Domain. As with the first EPS Ring, the Control VLAN is config-
ured on all of the interfaces and the resulting GUI shows the EPS Ring and which node is Master, as shown in the following
figures.
FIGURE 6-157 Configure Peer EPS Ring (to form SuperRing Configuration)