User guide

Example Scenario Protection Switching-EPSR
6-151
AlliedView NMS Administration Guide (Configuring Network Services)
Clicking on Configure Protection Scheme brings up the Task window to perform the configuration for each device. Once
done, selecting the VLAN IF for prot302 shows the GUI, in Figure 6-135. Compare this to Figure 6-123.
FIGURE 6-135 GUI for Configured Protection Data Ring
6.13.5.5 Reconfigure the Control and Data Rings
Now that the Control Ring and Data Ring are configured, another device may need to be added to the configuration. Per-
forming this involves combining many of the network services tasks, summarized as follows:
Reconfigure the links between two current devices and the new device.
Delete the link between the current devices.
Add the links between the new device and the two current devices.
Extend the VLANs to include the new device
Associate the Control Ring with the extended VLAN Interface
Select the VIF to configure the Control Ring
Use the same domain name, and extend to the new device.
Extend the Data Ring
Delete the Network VLAN of the Data Ring