User guide

The Network VLAN Manager Application - Configure Data Ring Protection Switching-EPSR
6-143
AlliedView NMS Administration Guide (Configuring Network Services)
FIGURE 6-121 Creating an EPSR Data Ring by Cloning Control Ring
The user fills in the VID and the Vlan Name. The user clicks on OK, and this brings up the Protection Ring Configuration
Panel with all columns filled in, as shown in Figure 6-122.
If more than one control ring could be applied to the data network VLAN, these will appear in the Possible EPS Ring Protec-
tions list. The user should select the one that will be used.
FIGURE 6-122 Protection Data Ring Configuration Panel