User guide

Protection Switching-EPSR The Network VLAN Manager Application - Configure Control
AlliedView NMS Administration Guide (Configuring Network Services)
6-140
6.13.2.3 View/Modify/Delete EPS Control RIng
Once a control ring has been created, it can be viewed by selecting the relevant networked VLAN and selecting View EPS Con-
trol Ring. The View EPS Control Ring window appears, with the attributes of the control ring included in the New Configured
Domains panel. Refer to the following figure.
Note: In release 12.0, the EPSR+ field is included as well.
FIGURE 6-118 View EPSR Control Ring Panel
The Delete and Modify buttons are now activated. To modify the control ring, the user can choose one of the editable fields
(explained in Table 6-26) and select
Modify Protection Domain. The task list window will appear as the application changes the
Control Ring attributes for each device.
To delete the control ring, the user selects
Delete Protection Domain. After a confirmation message appears, the control ring and
its attributes are deleted.
Note: The Delete Protection Domain operation deletes only the EPS domain associated with the ring, but not the
Loop Networked VLAN.
6.13.2.4 Enable/Disable EPS Control Ring
Refer to Table 6-26.