User guide

QoSPolicies for the FX20 Interface Quality of Service (QoS) Network Management
6-127
AlliedView NMS Administration Guide (Configuring Network Services)
2. With the Traffic Actions created, the QosPolicy (with its set of Rules) can be created.
• Select Network Services -> QoS -> Policy - This brings up the QoS Policy Maintenance Form.
Note: You can also go to the Network Service data node and select QoS policies -> Actions, and select an
existing Policy
• Select the New Policy button, and enter the New Policy Name, following the Policy naming conventions. Do not select
the Copy from ... tic box.
• At the Edit QoS Device Class List, click on Telesyn and then the Select button
• The QOS Traffic Policy form appears with its list of attributes. Since this is a new policy, only the two default rules
appear. If they are highlighted, select Remove (under Ip Filter Rules), and the result is a policy with no rules. (If they are
not highlighted, select a rule and select Delete Rule.) Refer to the following figure.
FIGURE 6-107 Creating a Policy with no Rules