User guide

QoSPolicies for the FX20 Interface Quality of Service (QoS) Network Management
6-125
AlliedView NMS Administration Guide (Configuring Network Services)
1. As mentioned in 6.11.12.2, the Traffic Flows are pre-defined and Traffic Priority is not used, so the first step is to create
a Traffic Action (or set of Traffic Actions) that will be associated with the queues.
• Select Network Services -> QoS -> Actions -> Traffic Action - This brings up the QoS Traffic Action Form.
Note: You can also go to the Network Service data node and select QoS policies - Actions, and double click an
existing Traffic Action.
• Select the New Action button, and enter the New Action Name, following the Policy naming conventions. Do not select
the Copy from ... tic box.
• At the Edit QoS Device Class List, click on Telesyn and then the Select button.
• The QOS Traffic Action form appears with its list of attributes. For the FX20 queue, only four are used, so select these
and edit the values.
Note: Although not necessary, you should delete the other attributes so that only the key attributes are
highlighted. Refer to the following figure.
• Click on Save Traffic Action, and click OK on the confirmation window.
• Click on New Action, enter another Traffic Action name, and select the tic box to copy the attributes from the Traffic
Action you just created. You will only need to modify the four attributes and select Save to save the second Traffic
Action.
• Repeat these steps for each Traffic Action, up to eight.