User guide

Quality of Service (QoS) Network Management QoSPolicies for the FX20 Interface
AlliedView NMS Administration Guide (Configuring Network Services)
6-122
FIGURE 6-103 Example ONU Port Profile
Note: The administrator can also create and view QoS policies using the CLI. When policies are created by the
AlliedView NMS, they are shown at the CLI with the prefix “NMS_” added and may append an “_a” or “_b”
to the name. When policies that are created at the CLI, they appear on the ONU and EPON port details
screens with a question mark appended.
Note: Any existing ONU or EPON profiles have a '?' appended to the profile name. Administrators can continue to
use these profiles and they will work as they did in 8.0. However, if you edit a profile or create a new one,
only the 'NMS Qos Policy names' can be selected, forcing an upgrade for these Profiles.
Note: In release 10.0 SP2, the EPON supports VLAN translations. As a result, the translated VLAN ID is also
included as part of setting the QOS policies.
6.11.12 QoSPolicies for the FX20 Interface
6.11.12.1 Overview
The AlliedView NMS GUI for QoS allows the administrator to configure ingress traffic parameters on the iMAP ports. (Refer
to 6.11.1.)