User guide

Profile Management Profile Configuration Parameters - Devices and Scoping
AlliedView NMS Administration Guide (Configuring Network Services)
6-54
6.10.1 Profile Configuration Parameters - Devices and Scoping
6.10.1.1 Devices
There are many different types of devices and ports in the network and each type has a different set of parameters associated
with it. Profile Management supports the following:
• Device profiles:
• iMAP and SBx3112
• Rapier
• SwitchBlade/9800
• AT8900
• AlliedWare Plus
• Card profiles:
• MGCP
• SIP
• Port profiles:
• Ethernet (Ether-like) Port
• Etherlike-DS3
• ADSL
• ADSL-BOND
• SHDSL Port
• VDSL Port
• POTS Port
• CES-DS1 Port
• CES-E1 Port
• NTE-DS1 Port
• NTE-E1 Port
• EPON
• ONU
• iMG/RG (Note that these are not available on the EE version, refer to 6.10.17.)
• General
• Internet
• Video
• Vo i c e
• CES
• CES_DS1/CES_E1
Note: A description of the RG Profile types is included in a section devoted entirely to RG provisioning, Section 7.
Note: For profiles for EPON interfaces and their QoS policies, refer to 6.11.11. Note that the iMAP_EPON device
class in QOS policies/actions is an 'exclusive' device class; a policy or flow cannot be used with any other
device-class once assigned to the iMAP_EPON device class.
Note: For the ADSL port profile the user can specify for a service VLAN the VC (0-3) as well as the VPI, VCI, and
framing.