User guide

Example Configurations for HVLAN, Translations HVLAN Configuration
AlliedView NMS Administration Guide (Configuring Network Services)
6-48
FIGURE 6-48 Selecting Links and Adding to the HVLAN Configuration
Clinking Next brings up the Configure VLAN Interfaces Form, as shown in Figure 6-49. For the iMAP 9000 devices, the
type must be changed to HVLAN, which the figure illustrates.
At this point the user can click on the Service Ports column and select which ports will included.
Note: Service ports that are part of an HVLAN configuration have restrictions, since they must be untagged.
Moreover, once a port is a member of any other VLAN (except 1), it cannot be added to the HVLAN
configuration.