User guide

Example Configurations for HVLAN, Translations HVLAN Configuration
AlliedView NMS Administration Guide (Configuring Network Services)
6-46
FIGURE 6-46 Example HVLAN Configuration
This example assumes the physical links (Link-10-20 and Link-0_0-2) have already been created, as explained in 6.2.4. On the
Physical Network map, Select and shift-select the three devices, and then right-click Network Services -> VLAN -> Create
VLAN. The Create VLAN form will appear (Initial VLAN Information). Fill in the fields for the VID502, as shown in Figure
6-47.