User guide

Example of Creating Network VLANs Extending the Island-Based VLAN
AlliedView NMS Administration Guide (Configuring Network Services)
6-44
Select the link and click Next.The Select/Create VLAN Interface form appears. Since the Training VLAN is not yet created
on the .13 device, click Create VIF. The Create New VLAN form appears, with the Training VLAN with the VLAN ID of 30
already filled in. Click OK and the VLAN Interface will be added, as shown in Figure 6-44.
FIGURE 6-44 Creating the VLAN IF on the extended Network VLAN Device
Select the row and click Next. The VLAN Operations form appears and shows what will be done to finish extending the Net-
work VLAN. Clink Finish and the Task Details window will perform the operations and give the results.
With the Training Network VLAN now extended, VLAN interfaces on the .13 device can be added that use the Training Net-
work VLAN.
To trim the network VLAN, perform these steps:
1. Go to the specific Network VLAN map. Right-click the device that will no longer have a VLAN IF and select Configure
VLAN Interface.
2. Select the Training Network VLAN from the pull-down menu, and then put all the tagged and untagged ports back to blank
(neither T nor U). Click Apply.
3. If any physical links need to be reconfigured since a device is no longer part of this Network VLAN, go to the Physical Net-
work map and delete/add/change links to match the trimmed configuration.