User guide
Network VLAN Manager (Excluding EPSR) Viewing VLAN Outage Statistics
AlliedView NMS Administration Guide (Configuring Network Services)
6-34
FIGURE 6-31 Exporting Link Configuration Data to an Excel File
If the user selects an existing profile or specifies the name of an existing profile, the data will be imported from the specified
Excel file and not re-exported. Any existing links included in the file will be skipped.
6.7.7 Viewing VLAN Outage Statistics
The VLAN Outage Monitor provides long-term outage statistics on individual VLANs, which allows you to determine how
your VLANs are performing over time. The VLAN Outage Monitor uses the Link Down trap to determine when an outage has
occurred and the Link Up trap to determine when the outage is cleared. The statistics recorded by the VLAN Outage Monitor
are stored in the NMS database and include:
• Network VLAN name – Name of the monitored Network VLAN
• Availability - The availability of the VLAN expressed as a value from 0 to 1 (0 percent availability to 100 percent availabil-
ity)
• Outage Time – Approximate total outage time in days, hours, minutes, seconds, and milliseconds
• MTTR - Approximate mean time to repair in hours calculated as Total Down Time / Number of Failures
• MTBF - Approximate mean time between failures in hours calculated as Total Up Time / Number of Failures
• Number of Failures – Number of failures recorded
• Start Monitor Time – This is the time when the Network VLAN was first created or the last time when the monitoring was
reset.
• Duration – The approximate elapsed time in hours between the Start Monitor Time and Current Monitor Time
The following figure demonstrates a typical monitoring timeline.