User guide

Creating Network VLANs Configure the VLAN Interfaces (Service Ports)
AlliedView NMS Administration Guide (Configuring Network Services)
6-22
FIGURE 6-18 Configure VLAN Interface Form - File
If this is an IP-based VLAN, you can enter the IP address in the cell in the IpAddress column, and the network mask in the cell
in the Mask column. This must be extended to a specific address within the subnet. For the port row, click the IpAddress cell
and enter the IP address, and then click the Mask cell and enter the network mask.
Note: If a VLAN subnet was entered on the first panel, when you click the IpAddress cell, the cell will be filled with
the subnet address, and when you click the Mask cell for that row (or any other cell), the Mask cell will be
filled with the mask value for the subnet. Typically, the Mask cell value will not need to be changed.
To configure service ports, click the cell in the Service Ports column and the Edit Ports form appears, as shown in Figure 6-
19.