User guide

Configure the VLAN Interfaces (Service Ports) Creating Network VLANs
6-21
AlliedView NMS Administration Guide (Configuring Network Services)
FIGURE 6-17 Adding Vlan Path Links - File
There is also the option to create a physical link by clicking Create New Link, and a new physical connection between two
devices and their ports can be created. This uses the same form as shown in 6.2.4.
6.3.3 Configure the VLAN Interfaces (Service Ports)
The next step is to configure the VLAN interfaces by adding any service ports to the Network VLAN. Service ports, as
shown in Figure 6-5 and Figure 6-6, are those ports configured on the individual node and are the local VLAN interfaces.
These ports can be configured as part of configuring VLAN ports for an individual device (as shown in Section 5.4), or they
can be configured here.
When clicking Next in the Modify Links form, the Configure VLAN Interfaces form appears, as shown in Figure 6-18.