User guide

Creating Network VLANs Modify the Network VLAN Link Configuration
AlliedView NMS Administration Guide (Configuring Network Services)
6-20
FIGURE 6-16 Create VLAN Net Form - Modify Links
Any links that were selected from the Physical Map when the Wizard was started are displayed in the Vlan Path Links table on
this form. The available physical links from each device are listed in the Add Links subform. Selecting the desired link from
the Add Links list and then clicking Add Links (now active) will place the selected link as one of the VLAN Path links, as
shown in Figure 6-17.
Note: When a link from one device is added to the VLAN Path Links, the next device is selected in the Add Links
subform. This would follow the normal procedure of going to the next “hop” in the Network VLAN. This
procedure allows one to “walk” from one device to the next over the interconnecting physical links, resulting
in a connected set VLAN interface that will form the broadcast domain of the created VLAN.