User guide

Procedure Example - Transfer of iMG to different Port Customer Cutover
5-263
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
FIGURE 5-242 Data filling Destination Ports to be Provisioned
The user selects the appropriate ports and then clicks on Provision Destination. The Task Details panel appears, and this
shows the status of each port as the attributes are copied over. (Each port goes through the status sequence Validated - Work-
ing... - Provisioned.) Refer to the following figure.
FIGURE 5-243 Task Details Panel as Target Ports are Provisioned
When all of the ports have been provisioned, the user sees that on the Port Management Panel, the source ports have a status
of Up, while the target ports have the same customer ID as the source ports and have a status of Down. Refer to the following
figure.