User guide

VDSL24 Port Port Management (iMAP Devices)
5-195
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
Note: In release 9.0, an iMG/RG that supports VDSL is not yet available, but an Allied Telesis VDSL modem
can be used. Refer to the iMAP Component Specification for details.
Note that the interface can support ADSL (ADSL2+) as well as VDSL2 mode. To switch modes, the user must disable the
interface, and then switch modes on this form.
5.6.25.1 VDSL Configuration - General Tab
This screen includes all the attributes that define the port, as show in the following figure.
As with the VDSL Port Profile, general parameters on the VDSL View/Modify screen are redistributed from one to two tabs.
Power management parameters are added to the updated General tab and the other rate-related parameters are moved to the
Rate Settings tab. As with ADSL, the read-only parameters are added to the left and the modifiable parameters are added to
the right.
Although power management parameters will be left off the screen when the iMAP release is less than 11.0.0, the remaining
general parameters will still be distributed between the General and Rate Settings tabs
FIGURE 5-182 VDSL Configuration - General Tab