User guide

Port Management (iMAP Devices) View the EPON2 Port Configuration
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-192
FIGURE 5-179 Triple Play Form for SHDSL with Bonding Option
Using the Triple Play form, individual even numbered ports can be bonded to the next higher odd port. Therefore, when the
user selects an even numbered port, the “Bond To:” selector is enabled. Either the next port, or a blank entry, can be selected.
Provisioning will set the wire mode appropriately.
Note: Provisioning will first deprovision a port, which will automatically unbond it, then if necessary it will be
rebonded.
As ports are bonded (or unbonded), the following occurs:
• When changing a port on the TriplePlay form, the odd port is removed from the list of ports that can be selected.
• Configuration changes are reflected in the Customer Ports table in Network Inventory.
5.6.23 View the EPON2 Port Configuration
The EPON2 port corresponds to the OLT on the EPON2 card that connects to up to 32 ONUs. The attributes shown on the
EPON Port Management Form.