User guide

Port Management (iMAP Devices) NTE8 Port Management Form
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-188
5.6.21.6 Port Thresholds Tab
This form allows the user to modify the threshold values for the DS1/E1 and PPP statisitcs.When a new value is entered in the
New Value field, the Modify button is enabled.
Note: In most cases, these DS1/E1 values are not modified because they are part of the DS1/E1 port profile; if
the user does change a value, the port is now out of sync with its associated profile, and “* “will appear next
to the Profile name on the DS1/E1 Port tab form (as well as the Port Inventory table). In the dual endpoint
configuration, the “*” will appear next to the specific port where the values were changed from the Profile.
To Resync the port, the user must re-apply the profile on the DS1/E1 tab form, which puts the values back
to what they are in the Profile.
Display The attribute that controls the display:
- Absolute Values
- Rate Per Second
- Million Per Second
Polling Interval: The Current Polling Interval in seconds
New Interval: Sets a new interval for polling. This is set with the Reset Polling Interval button.
Add Historical Data from
NMS:
Adds the data collected previously from NMS Performance Management
Add Historical Data from
Device:
Adds the data collected previously from the device.
TABLE 5-50 NTE DS1 Port Management - Stats Graph Tab
Field/Button Description