User guide

Port Management (iMAP Devices) CES8 Port (DS1/E1 Port Management Tabbed Form)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-178
5.6.20.3 PMON Statistics
FIGURE 5-166 CES PMON Statistics Tab
Peer IP Address: The IP address for the other end of the connection. \
Note: By filling in the peer values, the user is explicitly defining the
connection; filling in the attributes for the port may define the
port but does not actually set up the path through the network.
UDP Port: The UDP port for this end of the connection. This must be unique within an IP address
on a card
Peer UDP Port: The UDP at the other end of the connection.
Bytes per Packet: The default is 193 for DS1, 256 for E1.
Note: Refer to 6.16 on how this is controlled in a dual configuration.
Jitter Buffer Size: The size of the jitter buffer.
VLAN Priority The 802.1p priority bit setting.
IP DiffServ Code Point: the DSCP (Differentiated Services Code Point) value
RunTime Attributes The current status of the line.
Modify If a value has been changed, this button is activated.
Disable / Enable A toggle to enable (if disabled) or disable (if enabled) the PSPAN. If the user is disabling
the PSPAN, there is a warning.
Alarms... Goes to the Alarms window.
Clear Entry Fields If any values have been added, they are cleared (including pull-downs).
TABLE 5-46 CES DS1 Port Management - PSPAN Tab
Field/Button Description