User guide

Voice Port Management (Tabbed Form) Port Management (iMAP Devices)
5-165
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5.6.18.6 SHDSL Configuration Tab - DHCP Tab
Refer to 5.6.28.
5.6.18.7 SHDSL Configuration Tab - FDB Tab
Refer to 5.6.29.
5.6.18.8 SHDSL Configuration Tab - PMON Thresholds
This form shows (any) threshold values for the STU-C/R statistics.
Note: The thresholds are set for both the STU-C and STU-R at the same time and cannot be set separately.
5.6.18.9 SHDSL Configuration Tab - Device Data Collection
The Device Data Coll form has the same functions as the ADSL form as explained in 5.6.17.9
5.6.18.10 SHDSL Configuration Tab - IP Filters
The IP Filters form has the same functions as the ADSL form as explained in 5.6.17.10
5.6.18.11 SHDSL Statistics Tab - PMON Stats
The PMON Stats form is similar to the ADSL form except for the following:
• The statistics are the standard ones defined in RC3276. (STU-C and STU-R).
• There is no history of statistics (no previous day)
• If the port is bonded, each statistics column has Wire Pair-1 and Wire Pair-2 to show statistics for each pair.
5.6.18.12 SHDSL Statistics Tab - RMON Stats
The RMON Stats form has the same functions as the ADSL form as explained in 5.6.17.13. For a bonded pair, these statistics
tread the bonded pair as one wire.
5.6.18.13 SHDSL Statistics Tab - Graph Stats
The Stats Graph form has the same functions as the ADSL form as explained in 5.6.17.14. For a bonded pair, the STU-C and
STU-R have WP-1 and WP-2 so the user can display these for each statistic.
5.6.18.14 SHDSL Statistics Tab - Port Log
The Port Log form has the same functions as the ADSL form as explained in 5.6.17.15
5.6.19 Voice Port Management (Tabbed Form)
5.6.19.1 POTS24 Configuration Tab - Overview
When the POTS 24 is configured (as part of a customer configuration that includes analog voice), this service management
from provides all the relevant data.
Note: When an iMG/RG is configured for voice service using the GenBand, information about this configuration
is shown in the Voice Configuration tab. Refer to Section 7.
5.6.19.2 POTS24 Configuration Tab - Status
This form is similar to other port types, and lists the POTS attributes as well as Alerts