User guide

SHDSL Port Management Form Port Management (iMAP Devices)
5-163
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
FIGURE 5-155 SHDSL Configuration Tab - General - Bonded
TABLE 5-41 SHDSL Configuration Tab - General
Field/Button Description
WireMode Whether the port is 2-wire (Normal) or 4-wire (Bonded)
Admin. State/Status The Administrative State can be controlled and determines the Operational State. Refer to
5.5.24. For a bonded pair, the Admin State determines the Oper. State of both wire pairs.
Oper. State/Link State The ability of the port to provide service. The Administrative State must be up and then the
system determines if the port can provide service.
It is possible, in a bonded configuration, that one wire pair will be Up while the other pair is
Down. The line can still provide service, although at a lower rate. The user should check for
events/logs and fix the problem.
Status The status of the port that follows form the Administrative State and Operational State. For
meanings, refer to the iMAP User Guide, Section 4
- ONLINE
- IN TEST
- FAILED
- OFFLINE
- DEPENDENCY
- DEGRADED
- NOT INSTALLED
- INITIALIZATION REQUIRED
- TERMINATING
Wire Mode
Normal (2-wire) or Bonded (4-wire)
Connection State The connection state, such as Idle or Showtime
Actual Connect Rate The data rate that was actually attained.