User guide

Ether-like Config. Tab (Upstream and Downstream) Port Management (iMAP Devices)
5-137
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5.6.16.2 Ether-Like Port (General Tab) - iMG/RG
When the Ethernet port interfaces with an iMG/RG, there are additional fields that appear. Refer to the following figure.
FIGURE 5-132 Ether like Port Management Window - iMG/RG
Many of the values for the RG-specific fields are controlled by the Profile being used. These are explained in 7.4. Note the
following fields in particular:
• Multicast MAC Addresses (Video Tab)
• STB MAC Addresses (Video Tab) - MAC addresses for each STB. Addresses can be typed in, selected from the pull-
down, or removed (with selection Remove from pull-down).
• Enabled DHCP Relay Instances (DHCP tab) - These are the DHCP instances that are used that allow the RG to boot up
and be provisioned correctly. Ensure that all the relevant DHCP instances are enabled. Refer to 7.2.5.
For the tab form descriptions, refer to the ADSL Configuration tab, 5.6.17.
5.6.16.3 Ether-Like Port (Port Statistics Tab)