User guide

Port Management (iMAP Devices) Add Derived Voice Line for GenBand (on Status Tab Form)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-132
5.6.14 Add Derived Voice Line for GenBand (on Status Tab Form)
When the GenBand configuration is being used, the administrator can add a voice line immediately on the Status form by click-
ing the Add Derived Voice Line button. The following form appears:
FIGURE 5-129 Add Voice Line Form (one MGC Device Configured)
If a voice line has already been configured, the MGCP Device and iMG/RG Voice Endpoint (DNS name) are already provided,
and the pull-downs should be filled in descending order, since one will drive what is available in the next pull-down. After
choosing Add, you should see an additional MGCP Line Info tab in the Voice Configuration form. The corresponding line in
the Voice Service tab in the iMG/RG form must then be enabled (by clicking the Enabled tic box for the New Line Configura-
tion).
If a voice line is being added for the first time, the available devices appear in the MGC Device pull-down. Once a device is
chosen, the user must input the MAC address of the iMG as well as the attributes from the remaining pull downs. Refer to the
following figure.