User guide

Port Management (iMAP Devices) Provision New Customer / Port for SHDSL16/24

AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)

5-124

5.6.8 Provision New Customer / Port for SHDSL16/24

The following figure shows the Triple Play Customer Form for a SHDSL24 port. Note that you can only choose odd-numbered

port for first port if doing bonded.

FIGURE 5-121 Provisioning SHDSL24 Port

5.6.9 Provision New Customer / Port for EPON2

The EPON port is part of the configuration that includes the EPON2 card (for passive optical network) and the iMG646PX-ON

model which includes the Optical Networking Unit (ONU).

Note: For complete information about the EPON2 card, ONU, QoS policies being associated with VLANs, etc.

refer to the iMAP User Guide for 8.0

The numbering for the EPON ports is the standard slot.port.

The following figure shows the Port Management Form for a device and how the EPON ports are shown. The EPON2 port is

5.0.

Timing Reference Where the port will get its clocking reference from.

Bottom of Form Provision Enabled only after the minimum number of correct fields have

been data filled, and these fields have been data filled with valid

values.

TABLE 5-29 Provision Port for NTE8-DS1/E1Form

Panel Field/Button Description