User guide

Port Management (iMAP Devices) Accessing the Port Management Application
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-114
Note: There are three versions of the Port Management window and Port Management Details form.
1. View Only
• The Port Management window excludes the Provision and De-Provision buttons.
• The Port Management Details form excludes the fields/buttons that allow values or states to be changed.
2. Provision - The same as View Only, but includes the Provision and De-Provision buttons.
3. Setting - The same as Provision, but includes the fields/buttons that allow values or states to be changed.
Control of these versions is though the NMS Security Manager settings. Refer to Section 4.
Customer ID An ID that can be given to uniquely identify the port. In most cases, the subscriber’s telephone
number is used. For rules on DS1/E1 customer IDs, refer to 6.16.
Note: A customer ID should be a unique string and should apply to one
customer line; creating multiple customers with the same Customer
ID can make provisioning Triple Play confusing and may create
additional (excessive) tabs on the GUI forms.
Note: Also, do not use the * character in the Customer ID, since it will not be
properly handled during any task involving a search.
Status The status of the port that follows form the boolean AND of the Administrative State and Oper-
ational State (only if both are UP is the Status UP)
Provision New Cus-
tomer/Port
Enabled after a port with no Customer ID is selected, it invokes the Provision Port form. Refer
to the Note below.
De-Provision Cus-
tomer/Port
Deletes the Customer ID and sets the Administrative State to DOWN. The status becomes
OFFLINE. This operation also sets the port back to the AutoProv settings, removes any classifi-
ers on the port, removes VCs 1-3 from the port, and sets the VLAN back to Untagged:1 Tagged
None. Refer to the Note below.
View/Modify
Details
Enabled when a port is selected, it invokes the Port Management Details form. Refer to the
Note below.
TABLE 5-26 Port Management Application Window (Continued)
Field/Button Description