User guide

Card Management CES8 Card
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-104
5.5.13.5 POTS 24 Graph Stats Tab
This is the standard window that allows the user to display the Interface MGCP/SIP, and RMON statistics.
5.5.14 CES8 Card
The CES8 card provides “Pass-thru” Circuit Emulation Service for both E1 and DS1 circuits.
Note: The user provisions DS1 or E1 attribute, called the PORTTYPE, at the card level. EI and DS1 ports cannot
be provisioned on the same card. Moreover, to modify the PORTTYPE, the user must DISABLE the card.
Changing the PORTTYPE effectively destroys the card and creates a new card with the new port types.
TABLE 5-24 POTS24 Card Details - Statistics Tab for SIP
Field/Button Description
SIP Statistics Statistics supported for the SIP application running on the POTS24 card are defined in the
ATN SNMP Enterprise MIB.
Invites Received / Retransmitted: The total number of invite messages received and
retransmitted.
Non-Invites Received / Retransmitted: The total number of non-invite messages sent and
retransmitted.
Responses Received / Retransmitted: The number of responses messages received and
retransmitted.
Invites Sent / Invite Retransmits Sent: The total number of invite messages sent and
retransmitted.
Non-Invites Sent / Non-Invite Retransmits Sent: The total number of non-invite mes-
sages sent and retransmitted.
Responses Sent / Responses Retransmit Sent: The number of responses and retransmit-
ted Responses sent
Interface Statistics These are the statistics from the Interface MIB. Refer to the iMAP User Guide.
RMON Statistics These are the standard Ethernet-based statistics
Name Defined in the High Capacity RMON MIB (RFC3273 - etherStatsHighCapacityTable)
High Capacity Counts Name of high capacity counts, for example 63 Octet packets is the total number of packets
(including bad packets) received that were 64 octets in length (excluding framing bits but
including FCS octets).
Overflow The number of times the associated counter has overflowed. These should be 0.
Reset SIP Statistics Resets the SIP statistics to 0.
Enable RMON Statistics Activated when the RMON statistics are disabled.
Disable RMON Statis-
tics
Activated when the RMON statistics are enabled.
Reset RMON Statistics Resets the RMON statistics to 0.
Download Brings up the Download Software window. Refer to 5.5.23.