User guide

FE10/FX10 Card Card Management
5-95
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
FIGURE 5-103 FE10/FX10 Card Details
TABLE 5-18 FE10/FX10 Card Details
Field/Button Description
Device The device name and the slot number for the card.
Admin. State If UP, the FE10 is capable of providing service. If DOWN, can Run Diags.
Oper. State The FE10 is providing service. This state is not controllable but depends on the Admin.
State.
Status The current state of the card. States can be static or dynamic (transition of state such as Ini-
tializing or Running Tests).
Profile The template for provisioning data. The default is AutoProv. If the blank pull-down is cho-
sen, there is no profile (manually provisioned).
Preferred Load This is the software that will load when the card restarts. In normal operation this should be
the same as the running load. This is used during software upgrades.
Temporary Load This is software that will load the next time the card restarts, and is part of the software
upgrade process.