User guide

Card Management GE8 Card
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-90
5.5.5 GE8 Card
The attributes and options are the same as for the GE3 card except that the GE8 has a software load, described in 5.5.4.
5.5.6 ADSL24A Card
After selecting an ADSL24 card, the user can select View Details, providing specific information on the card and some of the
same options available on the Card Management table. Refer to Figure 5-100 and Table 5-16.
FIGURE 5-100 ADSL24A Card Details
Profile The template for provisioning data. The default is AutoProv. If the blank pull-down is cho-
sen, there is no profile (manually provisioned).
Modify Activated when the Profile is changed.
Disable Disables the card. Active only when the Admin State is UP.
Enable Enables the card. Active only when the Admin State is DOWN.
Restart Reboots the card. For the GE1, there is no software load.
Run Diags Runs diagnostics. Active only when the Admin state is DOWN, so must Disable first.
TABLE 5-15 GE3 Card Details
Field/Button Description