User guide

Card Management Accessing the Card Management Application
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-84
Note: Controlling the card configuration involves understanding how provisioning data works in the iMAP devices,
so an overview of provisioning data is given after the description of the application.
Note: Throughout this Section, the Card Management Forms have the following common buttons:
• Recent Commands... - This brings up the Recent Commands window, a listing of the CLI commands and responses for the
previous operation in the Card Management application. The user has the option to copy this to a Clipboard and then paste
it into another file for record keeping.
• Close - This closes the Application.
• Help - This brings up the context-sensitive help file.
The cards available are as follows:
• GE3 - 5.5.4
• GE8 - 5.5.5
• ADSL - 5.5.6
• SHDSL - 5.5.8
• CFC24/56/100/200 - 5.5.9/5.5.10
• FE10/FX10/FX20 - 5.5.11
• POTS24 - 5.5.13
• CES8 - 5.5.14
• NTE8 - 5.5.15
• PAC24 - 5.5.17
• EPON2 - 5.5.18
• VDSL24A/B - 5.5.19
• ADSL48A/B - 5.5.20
• 9100 - 5.5.21
• GE24POE - 5.5.22
• XE Cards (5.5.26)
• GE24 Cards (5.5.27)
5.5.2 Accessing the Card Management Application
To access the Card Management application, right click on the device and select Provision -> Card Management (you can also
select the device and select the Operations pull-down on the main menu items.
Figure 5-93 and Figure 5-94 show the Card Management window for a iMAP 9400 and iMAP 9700. Table 5-13 describes
the buttons and fields that are displayed.