User guide

Configure VLAN (Chassis View) SNMPv3 USM Configuration
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-80
5.4 Configure VLAN (Chassis View)
To configure a VLAN for a single device, right-click the device, and then select Provision -> Configure VLAN. The VLAN
chassis configuration screen will open immediately and fill in the present VLAN configuration. Refer to the following figures
for examples of the configuration screen.
Note: The Chassis view and VLAN Configuration view are combined, but the VLAN-related information will
change depending on the VLAN interface chosen.
FIGURE 5-90 VLAN Configuration Screen (Rapier Device)