User guide

Provisioning a Device MPEG Test
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-64
FIGURE 5-68 Create MPEG Test Form
Fields to datafill are:
• Test Name - This should be descriptive, and becomes the Name of the test in the Task List Details window.
• Channel List - The multicast IP address(es) for the channel(s) to be tested. If multiple channels are entered, each channel
will be tested sequentially. (If multiple iMG/RGs were selected, all iMG/RGs will be tested simultaneously.) Example val-
ues would be 225.1.1.11, 225.1.1.18
• Video Middleware Server Port - The port of the video server to be used, such as 2001.
• Duration - Length the test will run, in seconds
• Temp. IP Address - The default is 10.0.0.254
• Temp Subnet IP Address - The default is 255.255.255.252
Selecting Finish starts the test immediately, or the user can select Next to create a schedule, as shown in the following figure.