User guide

Provisioning a Device Software Configuration (Custom Loads)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-52
The Modify button allows modifying the details of a type. Select the type either via the table or the combo box, modify the file
names, and then push Modify. If you do anything else instead of pushing the Modify button, a popup dialog will ask whether or
not to finish the modification.
The Delete button allows deleting a type from the load. Select the type to delete using either the combo box or the table, then
push Delete.
More than one Details dialog can be displayed at the same time so Load contents can be compared and values can be copied
and pasted from one load to another (using ctl-c and ctl-v).
Note: Displaying details and modifying the same load in more than one simultaneous dialog, however, is not
recommended. The changes to the load will occur as they're made, but all the dialogs will not be refreshed
as they occur.