User guide

Provisioning a Device Software Configuration (Custom Loads)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-48
• A Description is Required
• Load <New Load> Already Exists
The Modify button allows modifying a description. Select a custom load from the table, modify the description, and then press
the Modify button. (Names cannot be modified after creation)
The Delete button allows deleting a load. Select a custom load from the table and press Delete. If the load contains any detailed
data, the user will be prompted to confirm the deletion.
The Details button brings up the Load Details form for the selected load. Select a load from the table, either standard or cus-
tom, and press Details. Details can also be brought up by double-clicking a row. Refer to Figure 5-52.
The Close button closes the dialog and saves all the changes. If for any reason communication is lost to the NMS server, the
user will be prompted to confirm closing (and lose any changes) or cancel closing. The message is:
Cannot Save Custom Load File. Do you want to continue exiting (and possibly lose any changes?
After resolving the communications problem, the dialog can be closed and the data will be saved.