User guide

Provisioning a Device Software Configuration (Standard Loads)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-46
The 3rd panel provides the user a chance to confirm selections before committing them, as shown in Figure 5-48.
FIGURE 5-48 MTAC Window - Third Panel
For each password to be generated, this panel displays the device, the release, the MTAC type, and the MTAC that will be used.
There are no row operations on this panel.
The Back button returns to the previous panel and can be used to change the device/release selection.
The Finish button initiates the password generation process. This process can be slow since it has to go to the WebGen server.
During this time a popup status display will show progress on an MTAC-by-MTAC basis.
If all passwords are successfully generated, a popup display will indicate so. Upon acknowledging this popup, the wizard will
be dismissed.
If any errors are detected during password generation, a popup message will indicate so and the wizard will remain up for mod-
ifications.
An example of the success popup dialog is Figure 5-49.
FIGURE 5-49 Example of using the MTAC Wizard Successfully
Note: When running the AlliedView NMS client as an applet or a Web Start client, by default, the client will not
have permission to open a network connection to the WebGen server. Attempts to access the WebGen
server will result in the following error: