User guide

Provisioning a Device Software Configuration (Standard Loads)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-38
5.3.9.2 Modifying Software Configuration
The table shows for the selected devices all of the filetypes for the devices. When the user selects the devices and clicks Mod-
ify Release Configuration, the Modify Release Configuration form appears, as shown in the following figure.
Caution: For the devices that will receive downloads, do not set their telnet idle session time-out to any
value less than 6 minutes. This minimum is needed to ensure the NMS is aware the download is
complete and can proceed with any further steps.
FIGURE 5-41 Modify Software Device Configuration Panel