User guide

Provisioning a Device Backup/Restore (with Purge Button)
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5-18
5.3.2.3 Restore Configuration (Options Depend on Device Type)
Once a device or set of devices has a backup file, it can be restored. Select a device that has a backup file and click Restore
Configuration. One of the following figure appears, depending on the device to be restored.
For Rapier/Switchblade devices only, the Rapier/Switchblade options are enabled, as shown below.
FIGURE 5-15 Restore Configuration for Rapier / SwitchBlade Devices Only
For iMAPs devices, the lower panel checkboxes are disabled, as shown below.