User guide

View Chassis
5-5
AlliedView NMS Administration Guide (Controlling and Provisioning Network Devices)
5.2 View Chassis
To view the connection layout of a device, right click on the device and select View Chassis. A pop-up image of the product
appears, as shown in Figure 5-2 and Figure 5-3.
For Rapier products, the chassis image shows in real-time the status of the links and ports. The link LEDs indicate the link
state for each port. A legend on the chassis face interprets the meaning for the LED colors, such as green for an enabled 100
MHz link and amber for an enabled 10 MHz link.
The port status is indicated on the chassis face by the port color. During normal operation, the port color is gray. If an alarm
occurs on a port, the color of the affected port will change to indicate the alarm condition. When the alarm is cleared, the port
color will change back to gray. If multiple alarms exist, the highest priority alarm condition will be displayed. When the
highest-priority alarm condition is cleared, the next lower priority alarm will be displayed.
The File pull-down has the Refresh and Exit options, while the Applications pull-down has the VLAN Interface Configu-
ration option. This will invoke the VLAN view of the device and allow for VLAN provisioning, as described in 5.4.
Note: The Refresh option is useful in picking up any card configuration changes.
The Polling pull-down is a toggle function to Start or Stop Port Pollers; the pollers allows port information to be polled for
the device so the port status can be updated. Along the bottom of the Chassis View is the date when the switch ports were last
polled.
Below the device is general information about the device.
Network Services HVLANs
Network VLANs
Profile Management
QoS Management
Customer Management
Enhanced Protection Switched Ring
(EPSR)
UPC Monitoring
Section 6.
Query/Control Device
- Alarms/Events
- Performance
- Compare Configuration Files
- Discover Attached iMG/RGs
- Display Switch FDB
- Telnet / SSH to Device
- Browse Device
- Rediscover Device
- Managed Object Properties
- Manage/UnManage
- Update Status
- SSH
Alarm Panel and Network Events panel
Configured Collection Panel
iMap Device, Applications
Discover Attached iMG/RGs in pull-down
Switch Forwarding Database window
telnet session window / SSH Login
(5.9.1)
(5.9.2)
(5.9.3)
(5.9.4)
(5.9.5)
(5.9.6)
(5.9.7)
(5.9.8)
(5.9.9)
(5.9.10)
(5.9.11)
(5.9.11)
Manage CLI Users (5.10)
Customer Cutover Port Management (5.11)
TABLE 5-1 Task List for Provisioning (Continued)
Task Screen / Form Name (if Applicable) Section