User guide

Provision Parameters User Interaction
12-9
AlliedView NMS Administration Guide (Northbound Interface)
12.3.6 Provision Parameters
Most of the provision operations will use parameters grouped in key/value format (HashMap). Accepted keys are already
specified and will need to be used as expected for the operation to be executed; unknown keys will be ignored. Most of these
keys have values that are also specific but some will accept user specified values.
The table below contains keys and possible values that can be used with it. Keys selected use names that relate to where they
are expected to be used. These parameters are very similar to those that are provisioning windows and used here to configure
same parameters on devices. The order of these parameters as they appear in a map does not affect the execution of the oper-
ation and there are more than these included here.
Provision/
provisionPort
Provision parameters Status of the operation Status returned can indicate the
operation has started or com-
pleted if time-out is specified.
Provision/
deprovisionPort
Provision parameters Status of the operation Status returned can indicate the
operation has started or com-
pleted if time-out is specified.
Provision/
modifyPort
Provision parameters Status of the operation. Status returned can indicate the
operation has started or com-
pleted if time-out is specified
Provision/
modifyRG
- MO match criteria (RGs)
- Provision parameters
Status of the operation Status returned can indicate the
operation has started or com-
pleted if time-out is specified.
TABLE 12-3 Provision Parameters
Keys Values Description
DEVICE <IP address> IP address of the iMAP device
SLOT_PORT <Port number> Slot and port number of the selected port (X.Y)
PORT_PROFILE <Port profile name> RG general profile name
RG_INET_PROFILE <RG internet profile
name>
RG internet profile name
RG_VIDEO_PROFILE <RG video profile name> RG video profile name
RG_VOIP_PROFILE <RG VOIP profile name> RG VOIP profile name
CUSTOMER_ID <Customer ID> Unique customer ID
CUSTOMER_INFO <Customer info> Any customer information
PORT_STATUS (ENABLED/DISABLED) Enable/Disable iMAP port
DHCP_AGEING (ON/OFF) Enable/Disable DHCP ageing on iMAP device
MAX_LEARNED_MAC_ADDRS (OFF/1..64) MAC address learn limit
IP_RANGES <IP filter ranges> Comma separated IP ranges
MAC_ADDRESSES <Allowed MAC
addresses>
Comma separated list of MAC addresses
TAGGED_VLANS <Tagged VLANs> Comma separated list of tagged VLANs for iMAP
port
TABLE 12-2 Operations Table
Module / Operation Parameters Types Return Types Notes