Installation Instructions

AT-GS950/8, AT-GS950/16, and AT-GS950/24 Switches Installation Guide

4. Slide the transceiver into the SFP slot until it clicks into place. See

Figure 13

Figure 13. Inserting the SFP

5. Verify that the handle on the transceiver is in the upright position, as

shown in Figure 14. This secures the transceiver and prevents it from

being dislodged from the slot.

Figure 14. Positioning the SFP Handle in the Upright Position

6. Repeat steps 2 through 5 to install additional SFP transceivers.

Note

SFP transceivers are dust sensitive. Always keep the plug in the

optical bores when a fiber optic cable is not installed, or when storing

the SFP. When you do remove the plug, keep it for future use.

SFP Transceiver

Handle