Installation Instructions

Chapter 2: Installation
34
Figure 6. Attaching the Rack-Mount Brackets to the Switch
Figure 7. Attaching the Rack-Mount Brackets to the Switch (Continued)
3. Mount the switch in a standard 19-inch equipment rack using four
equipment rack screws (not provided with the switch).
Figure 8. Mounting the Switch in an Equipment Rack
4. Go to “Installing Optional SFP Transceivers” on page 37 or “Cabling
the Switch” on page 40.
Installing the Switch on a Wall
To install the switch on a wall, perform the following procedure:
1. Turn the switch over and place it on a table.