Installation Instructions

AT-GS950/8, AT-GS950/16, and AT-GS950/24 Switches Installation Guide
27
Chapter 2
Installation
This chapter contains the following sections:
 “Reviewing Safety Precautions” on page 27
 “Selecting a Site for the Switch” on page 28
 “Cable Specifications” on page 29
 “Unpacking the Switch” on page 30
 “Installing the Switch on a Desktop” on page 32
 “Installing the Switch in an Equipment Rack” on page 33
 “Installing the Switch on a Wall” on page 34
 “Installing Optional SFP Transceivers” on page 37
 “Cabling the Switch” on page 40
 “Powering On the Switch” on page 40
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install
the chassis or any of its components.
Note
The  indicates that a translation of the safety statement is
available in a PDF document titled Translated Safety Statements.
Warning: To prevent electric shock, do not remove the cover. No
user-serviceable parts inside. This unit contains hazardous
voltages and should only be opened by a trained and qualified
technician. To avoid the possibility of electric shock, disconnect
electric power to the product before connecting or disconnecting
the LAN cables.
 E1
Warning: Do not work on equipment or cables during periods of
lightning activity.
 E2
Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord.
 E3